HYT TM-800 UHF Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 50

HYT TM-800 UHF Скачать руководство пользователя страница 29

29

Press the key programmed as [TA] to toggle the Talkaround function ON and OFF.

ON OFF

Selectable Squelch Level

1. Press the key programmed as [SEL SQL], the current squelch level is displayed on the

LCD as shown below.

2. Turn the Selector Knob to select your desired squelch level.

3. Press any key other than the power switch to save the selected squelch level. The

LCD returns to the original display mode.

Note: If the squelch level is set too high, you may not efficiently receive weak signals; if

the level is set too low, you may hear a constant white noise, a sputtering noise, or

unwanted signals.

User Selectable Tone (CTCSS/DCS)

This function can be programmed by your dealer to temporarily change the preset

CTCSS/DCS frequency on a channel.

1. Select your desired channel.

2. Press the key programmed as [UST] to enter the UST mode.

3. Use the Selector Knob to select a desired UST code/ name. The selected CTCSS/DCS

frequency is valid only in UST mode.

4. Press the [UST] key again, the radio exits from UST mode and the LCD returns to the

original display mode.

Public Address

This function can be used to amplify all the audio from the speaker and output the audio

through external speaker.

1.

Press the key programmed as [PA] to activate Public Address function. “PA” appears

on the LCD display. Press the key again to deactivate this function and return to

«
...
27
28
29
30
31
...
»

Содержание TM-800 UHF



















































Отзывы:

Нет отзывов