TC-265/365 SERVICE MANUAL
-
5
-
Radio Modes
1. Frame of Radio Modes
Select the function from the modes and make settings according to your needs.
2. Description of Mode Functions
Mode Function
Conventional Mode
This mode is used for normal operation.
PC Mode
This mode is used to read/write parameters from/to
the radio and to make settings via PC.
Dealer Mode
This mode is used for the dealer to set the
following modes: All Reset Mode; Manual Adjust
Mode; Wired Clone Mode.
All Reset Mode
This mode is used to initialize the radio function
settings, channel data and destination and to
enable/disable manual adjust mode.
Manual Adjust Mode
This mode is used for the factory or dealer to make
the following adjustment: frequency stability, RX
sensitivity, squelch level, transmit power,
CTCSS/CDCSS deviation, tone deviation and low
battery alert reference value.
Wired Clone Mode
This mode is used to transfer data from one radio
to another by an interface cable.
Test Mode
Spare
User Mode
Conventional Mode
1
PC Mode
2
Dealer Mode
All Reset Mode
3
Manual Adjust Mode
4
Wired Clone Mode
5