TC-265/365 SERVICE MANUAL
-
8
-
(7) CDCSS deviation:
Adjust at center, low and high frequency. Adjust wideband at group 0 and narrowband at group 2.
CDCSS is +023. Save the value. (Adjust wideband at group 1 and narrowband at group 3. CDCSS is
+754. Adjust CDCSS balance at VR500.) Pressing [PTT]/[MONI] can adjust upwards/downwards. Adjust
balance of CDCSS deviation at center, low, and high frequency.
(8) 2-Tone/5-Tone deviation:
Turn to any channel. Pressing [PTT]/[MONI] can adjust upwards/downwards. Tone signaling is 1860Hz.
(9) Low battery alert:
Turn to any channel. Adjust under maximum transmit power. Adjust power supply voltage to 80% of the
rate voltage: 5.8V. Press [PTT]/[MONI] so that red LED flashes.
Note:
1. TC-265/365 radio has 16 channels. Every four adjacent channels is a group. There are four groups
and they are marked as group 0, group 1, group 2 and group 3 respectively. The channel frequency
of each group is arranged as center, low, high and center frequency. Channels of group 0 and group
1 are wideband and channels of group 2 and group 3 are narrowband. You can adjust low frequency
of CTCSS/CDCSS (CTCSS: 67.0Hz, CDCSS: +023) at group 0 and group 2 and high frequency of
CTCSS/CDCSS balance (CTCSS: 250.3Hz, CDCSS: +754) at group 1 and group 3.
2. If the radio destination is not included in the initial data table, you can select VHF or UHF according
to the frequency range and IF and initialize the radio data through PC programming software.
5.3 PC Mode
You can make the following settings via PC. (Refer to the following table for more details.)
Machine serial number parameter;
General parameter;
User channel data;
Factory channel data (only for factory adjustment);
Center, low and high frequency (only for factory adjustment);
2-Tone frequency;
5-Tone frequency;
Initial data (only for factory adjustment);
Maintenance record.