TUNE UP PROCEDURE FOR PT4200-01
z
THE BUILT-IN CHANNELS ARE 15 CH1 SCAN
CHANNEL
z
THE RANGE OF FREQUENCY IS 421--470MHz .
Before test/debugging, make sure all the equipments have been well connected to the
ground.
Before test/debugging, make sure the antenna output terminal has been connected
properly to the corresponding devices and load.
The transmitter output must pass RF power attenuator before being connected to the
standard signal source/ frequency deviator/ frequency spectrum.
When testing the receiver, make sure not to conduct transmitting operation.
When in debugging/testing/service, make sure static free measures for human body and
equipments.
1.1 Service Equipment and Software
.
The following equipments and software in Table 1.1 are necessary for the service and test
of the radio.
Table 1.1 For Test and Service
:
Equipment and Software
No.
Item
Specifications
1
Computer
Higher than P2, compatible with IBM PC
,
WINDOWS 98/ME/2000/XP
2
Programming
Software
KSP-20
3
Programming
Line
KSPL02
4
Cloning Line
KCL01
5
DC Regulated
Power
Output voltage
:
7.5V, Output current
:
≥
5A
6
RF power
meter
Test range
:
0.5---10W
Frequency range
:
100MHz—500MHz
Impedance
:
50
Ω
SWR
≤
1.2
7
Frequency
Meter
Frequency range
:
0.1—600MHz
Frequency precision: Higher than ±1×10
-6
Sensitivity
:
Higher than 100mV
8
Frequency
Deviator
Frequency range
:
DC—600MHz
Test range
:
0--±5kHz
9
Digital
Input impedance
:
Higher than 10M
Ω
/V DC
,
with the ability of testing voltage,