background image

PRELIMINARY 

connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

Industry Canada Compliance 

This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numerique de la classe B est conforme à la norme NMB-003 Canada. 
 

FCC Requirements

 

Your radio must be properly licensed Commission prior to use. Your RELM Wireless dealer can 
assist you in meeting these requirements. Your dealer will program each radio with your 
authorized frequencies, signaling codes, etc., and will be there to meet your communications 
needs as your system expands. 

Only qualified technicians are allowed to maintain this product. 
Do not use the transceiver or charge a battery in explosive areas such as coal gas, dust, steam, etc. 
Switch OFF the transceiver while refueling or parking at gas station. 
Do not modify or adjust this transceiver without permission. 
Do not expose the transceiver to direct sunlight over a long time, nor place it close to heating 
source. 
Do not place the transceiver in excessively dusty, humid areas, nor on unstable surfaces. 

 
Safety:

    It is important that the operator is aware of and understands hazards common to the 

operation of any transceiver.

 

 
Please carefully take the transceiver out of the box. We recommend that you confirm the items 
listed in the following table before discarding the box. If any items are missing or have been 
damaged during shipment, file a claim with the carrier immediately. 

Содержание PRV599A


















Отзывы: