PRELIMINARY
transmitted.
To transmit a disconnect ID:
Method 1: Release [PTT], disconnect ID is transmitted.
Method 2: While holding down [PTT] button, press [DIAL], and then press [*], disconnect ID is
transmitted.
8,CHANNEL SCAN
Press
[SCN]
, radio begins scanning from current channel in ascending order, and “SCAN”
appears on LCD. To stop scanning, press
[SCN]
again.
■
SCAN OPERATION
When radio locks in on a busy channel, scan can be restarted according to the restart mode,
which can be programmed by the dealer as
time-operated scan
or
carrier-operated scan
.
①
Time-operated scan
After radio locks in on one busy channel for a period (the time is set by the dealer.), the radio will
begin scanning other channels even if the channel is still busy.
②
Carrier-operated scan
Radio will lock in on one busy channel until there is no activity, and then after a delay (delay
time is set by the dealer), radio begins scanning other channels.
■
PRIORITY SCAN
If your dealer has set a priority channel, when radio scans non-priority channels, it will
periodically detect the priority channel, and when it detects any activity on the priority channel,
radio switches to scan the priority channel immediately. When a priority channel is selected, “P”
appears on LCD.
■
CHANNEL DELETE
This feature allows radio to delete undesired channels from the scan list. Select the channels to be
deleted by using CHANNEL SELECTOR knob in non-scan mode. Holding down [MONI] button
and pressing [SCN] key can toggle the selected channel between ADD and DELETE. When the
current channel is in scan list, “A” is displayed on LCD.
DELETE ADD
■
SCAN REVERT CHANNEL
The
scan revert channel
feature sends you to the right transmit channel while responding to or
initiating a call during channel scan. Press
[PTT]
button, radio stops scan and transmits on the
revert channel. This feature is set by the dealer.
9, FREQUENCY REVERSE
／
TALK AROUND
If communications between radios are disrupted because of a long distance from repeaters or
other reasons, frequency reverse feature can be used in such cases. When frequency reverse
feature is enabled, transmit frequency and receive frequency will be reversed, and at the same
