PRELIMINARY
★
Even if
[A],[B],[C]
and
[D] h
ave been set invalid in manual dialing, these keys can be used
when this feature is enabled.
★
If enter unwanted digits, press
[MONI]
button, and then re-enter the whole number.
★
To disable this feature, press
[PTT], [SCN] , [TA] or [LO] ,
and the stored codes are deleted.
②
CONFIRM STORED DTMF CODE
Press
[DIAL]
key, and then press
[*],
LCD displays as the below. And then press the digit key
([0]-[9]) in which the DTMF code is stored, the stored code is displayed on LCD and
corresponding DTMF tone is heard. To return to original display, press any key.
③
DIAL
To transmit stored DTMF code, press
[DIAL]
, and then press corresponding digit key ([0]-[9]).
The code is displayed on LCD during transmitting.
④
DELETE STORED DTMF CODE
To delete a code, press
[DIAL],
and press
[D]
(at this time LCD displays as the below), and
then press the digit key in which the code is stored ([0]-[9]). To cancel this operation, press any
key other than
[0]
～
[9].
■
RE-DIAL
Double pressing
[DIAL]
key, radio re-dials the last transmit code, which will be displayed on
LCD during transmitting.
NOTE: Re-dial memory is deleted when the radio is shut off.
11, CODE SQUELCH
Code squelch can be set by the dealer. If the feature is enabled and the received code is same as
the radio ID code (3-10 digits) which is set by the dealer, squelch is opened. If Auto- Responder
and Call Alert Tone are enabled by the dealer, they can be used together with Code Squelch. But
when Group Call is enabled, Auto- Responder is invalid.
To send a call, hold down
[PTT]
and enter ID code or Group Code by the keypad, if you like,
you also can operate in store and send or auto-dial mode. When transmission ends, the radio
returns to normal operation.
Note: Code squelch cannot be used together with selective call on the same channel.
12, SELECTIVE CALL
Selective call can be set by the dealer. This feature is similar with code squelch, but it can be
