PRELIMINARY
time, corresponding CTCSS/CDCSS encode and decode also be reversed. To enable or disable
the feature, press
[TA]
key.
Enable Disable
There is some difference between TALK AROUND and FREQUENCY REVERSE. When TALK
AROUND is enabled, TX frequency is changed to be same as RX frequency and at the same time
CTCSS/CDCSS encode and decode change correspondingly. To enable or disable TALK
AROUND, press
[TA]
key.
Enable Disable
10, DTMF SELECTIVE CALL
■
MANUAL DIAL
Holding down
[PTT]
button, press DTMF keys, corresponding DTMF digits are transmitted, and
DTMF tones can be heard. The radio can be programmed by the dealer to continue transmitting
for 2 seconds after
[PTT]
is released, therefore, in the 2 seconds, a DTMF code can be
transmitted without pressing
[PTT]
button.
[A], [B], [C]
and
[D]
can be programmed invalid by
your dealer.
■
STORE AND DIAL
When this function is enabled, after entering DTMF code with up to 16 digits in receive mode,
press
[DIAL]
key, you can transmit the entered code.
★
Even if
[A],[B],[C]
and
[D] h
ave been set invalid in manual dial, these keys still can be used in
this feature.
★
”[D]” can be set as vacant number by the dealer, i.e., “D” is not transmitted, it only represents
a pause time that is set by the dealer.
■
AUTO-DIAL
This function is enabled or disabled by the dealer.
①
Store DTMF code
One DTMF code with maximum 16 digits can be stored in one digit key ([0]-[9]). Press
[DIAL]
,
and then press [#], LCD displays as the below.
Enter the code to be stored ( 16 digits maximum)
with the keypad, and press
[DIAL]
, and then press one digit key of
[0]
～
[9]
, the entered code is
stored in the corresponding digit key.
