PRELIMINARY
FEATURES AND OPERATION
1,POWER
To turn on the power, turn
POWER/VOL
knob clockwise until a “click” is heard (the tone also
can be programmed as “beeps”), and characters will be displayed on LCD. To shut off the power,
turn
POWER/VOL
knob counter clockwise until a “click” is heard, and characters disappears
from LCD.
。
2,VOLUME
Press
[MONI]
button to monitor background noise, and at the same time turn
POWER/VOL
knob to adjust the volume to a comfortable level.
3,MONITOR
If monitor function has been set valid by your dealer, in receive mode, press [MONI] button,
you can monitor activities on your selected channels.
There are three ways to operate [MONI] button, one of which can be chosen by your dealer.
①
Hold down the button , the speaker is switched on; Release the button, the speaker is switched
off
②
Hold down the button, if received signal has correct CTCSS/CDCSS, speaker is switched on;
release the button , speaker is switched off.
③
Press the button, if received signal has correct CTCSS/CDCSS, speaker is switched on;
release the button , speaker is switched off.
If monitor function has been set invalid by the dealer, pressing [MONI] cannot monitor the
channel.
4, SELECT CHANNEL
Turn Channel selector knob to change channel number which is displayed on LCD. Turn the
knob clockwise, channel number will increase, and turn counter clockwise, channel number will
decrease. Transmit and receive frequencies of each channel have been set by the dealer.
5,SELECT SQUEL LEVEL
Hole down
[MONI]
button, and then press
[LO]
, current squelch level code is displayed on LCD
as below figure. Turn
CHANNEL SELECTOR
knob to select the squelch level, and then press
any key except
[LAMP]
to store the setting. LCD returns to origin display.
Note: If the squelch level is set too high, you may not efficiently receive weak signals; if the
