Hyster N30ZDR, Руководство пользователя

Страница: 20 / 28

DISASSEMBLE (WITHOUT SIDESHIFT)
For the following procedures, refer to Figure 10.
1.
Orient front frame assembly with roller guides
down and secure the unit.
2.
Remove the selector valve. Refer to Front Selec-
tor Valve.
3.
Remove nuts from tilt cylinder. See Figure 10.
4.
Remove capscrews (3), washers (2), and re-
tainer plate (1) from each side of tilting frame.
5.
Use a punch to remove pivot pins (8) from each
side of tilting frame.
6.
Remove tilting frame from fixed frame.
7.
Remove bushings from fixed frame.
8.
Remove tilt cylinder trunnion caps, capscrews
(5), and pin (4).
9.
Remove tilt cylinder. Remove bushings from tilt
cylinder.
10.
Disassemble tilt cylinder if repair is necessary.
See Tilt Cylinder.
1. RETENTION PLATE
2. LOCKWASHER
3. CAPSCREW
4. PIN
5. CAPSCREW
6. TRUNNION CAP
7. FIXED FRAME
8. PIVOT PIN
9. BUSHING
10. BUSHING
11. TILT CYLINDER
12. TILTING FRAME
13. CAPSCREW
14. NUT
Figure 10. Front Frame Without Sideshifter
Reach Assembly Front Frame 4500 SRM 1196
14