Hyster D264, Руководство по обслуживанию и ремонту

Страница: 27 / 30

Instrument Panel Removal and Installation
WARNING
Always disconnect the battery ground cable be-
fore making repairs to prevent possible damage
and injury. Install a tag on the battery terminal so
that no one connects the cable on the terminal.
1.
Disconnect battery.
2.
Remove four capscrews that fasten console
panel cover.
3.
Remove four screws that fasten instrument
panel to console.
4.
Align instrument panel on console and install
capscrews.
5.
Install instrument panel cover.
6.
Connect battery.
Key Switch Removal and Installation
REMOVE
1.
Move the lift truck to a safe, level area.
2.
Block drive wheel to prevent truck from rolling.
3.
Disconnect battery connectors and turn the key
switch to the OFF position.
4.
Remove instrument panel. See Instrument
Panel Removal and Installation.
5.
Remove cover.
6.
Discharge the capacitors inside the controller.
7.
Remove nut retaining the key switch to
bracket.
8.
Remove the key switch.
9.
Identify and disconnect electrical wires to
switch.
INSTALL
1.
Connect wires to proper terminals.
2.
Mount the key switch in bracket.
3.
Install nut to retain the key switch. Make cer-
tain switch is properly aligned before tighten-
ing retaining nut.
4.
Install instrument panel. See Instrument Panel
Removal and Installation.
5.
Connect battery connectors.
6.
Test the key switch by turning it ON and OFF.
7.
Install cover.
2200 SRM 1612 Instrument Panel Removal and Installation
19