Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server, Руководство администратора

Страница: 21 / 82

Print Server Administration User’s Guide
EtherP Admin Administration
15
8. Click on the Add >> button to add the print queue to the Serviced Queues list
for the port.
9. Click OK , then choose Save Configuration from the Configuration menu (or
press the Save Configuration toolbar button) to change the settings in the print
server and the NetWare server. The print server will restart itself and begin
serving the specified print queue.
If you created the print queue in step 6, you may need to assign queue operators and
queue users to the print queue using
EtherP Admin or the NetWare PCONSOLE
program. By default, SUPERVISOR is assigned as the print queue’s operator, and
all members of the group EVERYONE are allowed to use the print queue. For
information about assigning print queue users and operators using
EtherP Admin ,
see the Managing Print Queues section on page 57.
Setting up as a NetWare Remote Printer
Your network print server can also be set up as NetWare remote printer. This allows
slightly easier administration, but may increase printing delays. To set up a printer
port as a remote printer port,
1. Make sure you are logged on to your NetWare server as SUPERVISOR, or
that you have permissions equivalent to SUPERVISOR.
2. Make sure that the NetWare protocol is enabled in the server. This setting is
found in the Server Device Configuration window, accessible by selecting the
print server and choosing
Server Device... from the Configuration window.
3. Make sure you have a NetWare print server created and running on your
NetWare file server. Consult your NetWare documentation for instruction on
how to do this.
4. Choose Netware Protocol... from the EtherP Admin Configuration menu, or
click the Configure NetWare button in the toolbar. Click on the Remote
Printer tab.
5. Click on the port number button corresponding to the port you will be using
for remote printer service.
6. Click on the Bindery Remote Printer selection. EtherP Admin will display a
list of NetWare servers accessible from your network.