Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server, Руководство администратора

Страница: 73 / 82

Print Server Administration User’s Guide
EtherP Admin Administration
67
[SNMP Traps]
1 - Traps <Disable>
2 - Target 1 IP Address <203.69.140.234>
3 - Target 1 Community Name <public>
4 - Target 2 IP Address <0.0.0.0>
5 - Target 2 Community Name <>
6 - Target 3 IP Address <0.0.0.0>
7 - Target 3 Community Name <>
0 - Return to TCP/IP Menu
Enter Selection:
By default, SNMP traps are disabled. Select the Traps item to enable or disable
the sending of traps:
1. Disable
2. Enable
0. Return to SNMP Traps Menu
Enter Selection:
Once traps are enabled, you can assign up to three different hosts as designated
trap recipients. With each trap recipient IP address, there is also an associated
SNMP community name that will be included in the IP request. To change an IP
address or community name, select the appropriate menu item and enter the
desired value.
3. When you are done changing TCP/IP settings, choose 0 to return to the Main
Menu.
4. Choose the Save Configuration menu item. The print server will ask for
confirmation:
Do you really want to save the configuration?
(y/n)
Answer
y
to confirm the save. The
telnet
connection will drop, and the print
server will reset itself, letting the new TCP/IP settings take effect.
Changing Server Settings
From the Server Configuration menu, you can change the server name, as well as the
Location and Contact fields (used for identifying the location of the print server and
the person responsible for maintaining it).
To change one of these settings,
1. From the main menu, choose Server Configuration. The print server will
display the Server Configuration menu.