Hypermedia HG-4000 3U, Руководство по эксплуатации продукта

Страница: 77 / 192

HMC Product Manual
67
Release 3.4: May 2010 Groups
< Specific Group Name >
All calls coming from Resources assigned to this Group are rerouted to the selected
Group. The LCR rules are not analyzed for calls entering the LCR module from this
group.
7. Select or clear the Int. Routing checkbox. When selected, all outgoing calls through the
group are logged. The logs are then checked to determine the destination number for an
incoming calls. If a match is found, the original destination number is ignored.
8. Select or clear the Report Calls checkbox. When selected, calls are sent to an external
Hypermedia application for billing.
Note:
To purchase the billing application, contact Hypermedia.
9. Click Save Settings .
Using the Default Group Settings
The HMC includes pre-defined Group settings. These can be used instead of customized set-
tings.
To apply the default Group settings:
1.
From the HMC navigation pane’s LCR branch, click the Groups sub-branch. The Groups
screen is displayed.
2. Scroll to the bottom of the screen. The Create Default Groups button appears within the
Default Groups prompt.
Figure 64: Create Default Groups Button
3. Click Create Default Groups .
4. Scroll to the top of the page.
5. Click Save Settings .