Hypermedia HG-4000 3U, Руководство по эксплуатации продукта

Страница: 138 / 192

HMC Product Manual
128
Release 3.4: May 2010 Scheduler
4. Configure the task parameters:
Slot
Select or clear the checkboxes. Each checkbox represents the GSM card located in the
numbered slot counting from the left.
SIM
From each module’s dropdown menu, select the SIM card that that module will use.
Select
As Is if the Gateway does not change the SIM activity.
Note:
Use the All dropdown menu to assign the same SIM card to all four modules.
5. Click Next . The Set Command screen, with the command syntax, is displayed.
Figure 124: Task Scheduler Set Command Screen
WARNING!
Clicking menu deletes the new task. The table of schedules tasks is
redisplayed.
6. Configure the task’s schedule:
a. Click (calendar icon). A calendar opens in a new browser tab.
Note:
First, set the time. As soon as you click the date, the browser tab closes and the date
and time are entered into the Start Time field.
b. Enter the time that the command will start.
c. Enter the date that the command will start. When you click the date, the browser tab
closes and the date and time are entered into the Start Time field.
d. From the Repeat drop-down menu, select either Yes or No.
e. If the task is configured to repeat, select a Repeat Period . The Repeat Period can be
either months, days, hours, or minutes.
7. Click Set Command . The new Task is displayed in the Task Scheduler screen.