HYOSUNG TE450 - Скачать руководство пользователя

Страница: 40 / 100

Failure  to  use  extra  care  when
operating  on  excessively  rough,
slippery,  or  loose  terrain  can  be
hazardous.

Failure to use extra care can cause
loss of traction or vehicle control. This
could result in an accident, including
an overturn.

Do not operate under these conditions
until you have learned and practiced
the skills necessary to control the ATV
on such terrain.
Always be especially cautious on
these kinds of terrain.

WARNING

Failure to use extra care when
operating this ATV on unfamiliar
terrain can be hazardous.

You can come upon hidden rocks,
bumps, or holes, without enough time
to react. This could cause the ATV to
overturn or go out of control.

Go slowly and be extra careful when
operating on unfamiliar terrain.
Always be alert to changing terrain
conditions when operating the ATV.

WARNING

The ATV can start moving as soon as
you release the parking brake.

Unexpected movement can cause you
to lose control of the ATV.

Make sure you shift into neutral and
apply the rear brake before you
release the parking brake.

WARNING

Содержание TE450 -





































































































Результаты поиска

Содержание TE450 -

Отзывы:

Похожие инструкции для TE450 -

Бренды по названию

Популярные бренды

HYOSUNG TE450 -, Руководство пользователя

Результаты поиска

Содержание TE450 -

Отзывы:

Похожие инструкции для TE450 -

Бренды по названию

Популярные бренды