HYOSUNG TE450 -, Руководство пользователя

Страница: 36 / 100

36
◉ ◉
OBSERVE YOUR INITIAL AND
MOST CRITICAL SERVICE
The initial service (break-in maintenance)
is the most important service your ATV will
receive. During break-in operation, all of the
engine components will have mated
together and seated. Maintenance required
as part of the initial service includes
correction of all adjustments, tightening of
all fasteners and replacement of dirty oil.
Timely performance of this service will help
make sure you get the best service life and
performance from the engine.
Before attempting to start the engine,
make sure to follow these steps.
1. Set the parking brake.
2. Shift the transmission to neutral.
3. Turn the key to the “ ” (ON) position.
◉ ◉
WHEN THE ENGINE IS COLD :
If the ambient temperature is below 5 � C
(40
�
F ) :
1. Pull the choke lever to the ENGAGE
position.
2. Apply the rear brake pedal and release
the parking brake by squeezing the clutch
lever.
3. Squeeze the clutch lever and push the
electric starter switch.
4. Immediately after the engine starts, return
the choke lever halfway.
5. When the engine is sufficiently warmed
up, move the choke lever to the “OFF”
position.
If the ambient temperature is at or above
5
�
C (40
�
F ) :
1. Pull the choke lever to the ENGAGE
position halfway.
2. Apply the rear brake pedal and release
the parking brake by squeezing the clutch
lever.
3. Squeeze the clutch lever and push the
electric starter switch.
4. When the engine is sufficiently warmed
up, move the choke lever to the “OFF”
position.
STARTING THE ENGINE
N O T E
If the ambient temperature is above
20
� �
C (68
� �
F), operation of the choke is
not necessary to start the engine.
Operation of the choke can make the
engine hard to start due to too rich
fuel/air mixture.