HYOSUNG TE450 -, Руководство пользователя

Страница: 48 / 100

48
If you come to an obstacle that you cannot
avoid, you may be able to cross over it
using the following procedure.
1. With the obstacle straight in front of you,
approach at walking speed.
2. Rise up slightly on the footrests.
3. Pull up on the handlebars and apply a
little throttle as the front wheels reach the
obstacle.
4. Lean forward and release the throttle
after the front wheels have cleared the
obstacle.
5. Return to your normal riding position after
the rear wheels clear the obstacle.
Remember that some obstacles are too
high for your ATV or for your abilities.
If you are not sure that you can safely
cross over an obstacle, back up and ride
around the obstacle.
RIDING OVER OBSTACLES
Improperly operating this ATV over
obstacles can be hazardous.
Improperly crossing obstacles can
cause loss of control or a collision.
It can also cause the ATV to overturn.
Follow the procedure in this section
carefully when crossing over obstacles.
WARNING
You can ride the ATV through shallow
water. Make sure it is not more than 30 cm
(12 in) deep and is not moving fast. Choose
a good place to cross before you ride
through any water. Look for a spot where
the banks are gently sloped on both sides
and the bottom of the stream is hard.
If you are unfamiliar with the area, park
the ATV and inspect the stream first to find
a suitable spot for crossing. When crossing,
operate the ATV at a slow, steady speed.
Be careful not to damage banks when
crossing.
RIDING THROUGH WATER
Operating this ATV through deep or
fast flowing water can be hazardous.
The ATV tires may float, causing loss
of traction and loss of control.
This could lead to an accident.
● ●
Never operate this ATV in fast
flowing water or in water deeper
than described in this section.
● ●
Remember that wet brakes may
have reduced stopping ability. Test
your brakes after leaving the water.
If necessary, apply them several
times to let friction dry out the
pads.
WARNING