HYOSUNG TE450 - Скачать руководство пользователя

Страница: 17 / 100

Do not operate the steering lock while
driving at one’s pleasure.
Moving  the  ATV  while  the  steering  is
locked  can  be  hazardous.  You  could
lose  your  balance  and  fall,  or  you
could drop the ATV.

Stop the ATV and place it on a level
surface before locking the steering.
Never attempt to move the ATV when
the steering is locked.

WARNING

This ATV has the steering lock above the

upper right suspension arm assembly.

To lock the steering :

①

Turn the handlebar all the way to the
right.

②

Insert the ignition key into the steering
lock, and take a turn it from the

“ ● ”

position.

③

Remove the ignition key.

STEERING LOCK

①①

COOLANT TEMPERATURE INDICATOR

LAMP

The coolant temperature indicator lamp

will come on when the coolant gets too hot
while operating.

When coolant temperature is higher than

120

℃

(248

℉

), the coolant temperature

indicator lamp comes on.

INSTRUMENT PANEL

When the ignition switch is turned to
the “ ” (ON) position, the display of
speedometer will come on.

CAUTION

�

Содержание TE450 -





































































































Результаты поиска

Содержание TE450 -

Отзывы:

Похожие инструкции для TE450 -

Бренды по названию

Популярные бренды

HYOSUNG TE450 -, Руководство пользователя

Результаты поиска

Содержание TE450 -

Отзывы:

Похожие инструкции для TE450 -

Бренды по названию

Популярные бренды