HYOSUNG TE450 - Скачать руководство пользователя | Manualshive

Страница: 41 / 100

background image

41

After making sure that the engine is

warm,  apply  the  rear  brake  and  then
release  the  parking  brake.  To  release  the
parking  brake,  simply  squeeze  the  clutch
lever  until  the  parking  brake  lever  knob
releases.

Pull in the clutch lever and engage first

gear  by  pushing  down  the  gearshift  lever
while  depressing  the  rear  brake  pedal.  To
start moving, slowly release the clutch lever
as  you  gradually  open  the  throttle.  As  the
clutch  engages,  release  the  rear  brake.
When  the  ATV’s  speed  increased,  pull  in
the  clutch  lever  and  release  the  throttle  at
the  same  time.  Lift  the  gearshift  lever  to
engage second gear and release the clutch
lever. You can select third, fourth, and top
gear in succession by repeating this shifting
sequence.

Reduce ATV speed before shifting down.

To shift down, release the throttle and push
down on the gearshift lever to engage a
lower gear.

Opening the throttle suddenly can be
hazardous.

The front wheels can lift off the
ground and cause loss of control of
the ATV.

Always open the throttle gradually
when you accelerate.

WARNING

Shifting incorrectly can be hazardous.

Downshifting  at  too  high  of  a  speed
can  cause  sudden  slowing  and  may
pitch the rider forward.
Also,  engine  and  drive  chain  damage
can occur if you do not shift correctly.

Slow down before downshifting and
always release the throttle every time
you shift gears.

WARNING

LOCKED

RELEASED

«
...
39
40
41
42
43
...
»

Содержание TE450 -





































































































Отзывы:

Нет отзывов

Похожие инструкции для TE450 -

Бренд: Yamaha Страницы: 435

Бренд: KEDO Страницы: 2

Бренд: KEDO Страницы: 3

Бренд: KEDO Страницы: 2

Бренд: BMW Страницы: 288

Бренд: Yamaha Страницы: 88

Бренд: Honda Страницы: 104

Бренд: Can-Am Страницы: 196

Splendor Pro CLASSIC

Бренд: HERO Страницы: 56

Бренд: Honda Страницы: 362

Бренд: GAS GAS Страницы: 26

80 MasterGuard (L+K)

Бренд: SCHUBERTH Страницы: 44

Бренд: DYNATEK Страницы: 10

Бренд: DYNATEK Страницы: 12

Бренд: hepco & becker Страницы: 4

Бренд: Dynafit Страницы: 52

Бренд: Chicago Electric Страницы: 12

Бренд: Innovv Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды