manualshive.com logo in svg

HYOSUNG COMET 650 FI, Руководство пользователя

Поделиться
Скачать
HYOSUNG COMET 650 FI Скачать руководство пользователя страница 35

34

①①

CLUTCH LEVER

The clutch lever is used for disengaging

the drive to the rear wheel when starting
the engine or shifting the transmission gear.

Squeezing the lever disengages the

clutch.

②②

“PASS ” SWITCH

Press the “PASS” switch to operate the

head lamp high beam for using when pass.

With the ignition switch in the “ON” posi-

tion, push the “PASS” switch to operate the
head lamp high beam.

③③

DIMMER SWITCH

Change the direction of head lamp light.

◉

“        ”  : The  head  lamp  high  beam

come on.

The high beam indicator lamp
also comes on.

◉

“        ”  : The  head  lamp  low  beam

come on.

LEFT HANDLE SWITCH

Do not operate when the dimmer switch
“        ” position.

CAUTION

�

�

�

�

�

Riding the motorcycle with the LCD dis-
play panel indicating a problem with fuel
injection system and with “FI” check
lamp lit can damage the engine and
transmission.

Whenever the “FI” check lamp is lit and
the display panel indicates “FI” have
your authorized Hyosung dealer or a
qualified mechanic inspect the fuel
injection system as soon as possible.

CAUTION

N  O  T  E

If the LCD display panel indicates “FI”
letters and speedometer alternately, and
the “FI” check lamp comes on and
remains lit, keep the engine running and
bring your motorcycle to an authorized
Hyosung dealer.
If the engine stalls, try restarting the
engine after turning the ignition switch
off and on.

When the LCD display panel 

⑪

indicates

“CHE”, make sure that the engine stop
switch is in the “      ” position.

If the LCD display panel still indicates

“CHE” after above procedure, inspect the
ignition fuse and connection of lead wire
couplers.

 

 Comet650  2008.7.11 3:40 PM  ˘

` 34   JINSUN  300DPI 100LPI  T

Содержание COMET 650 FI



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды