HygroMatik Basic-DS, Руководство пользователя

Страница: 68 / 102

SPA
Page 68
The switching functions of the relays can be modified using parame-
ters. However, the functions are not intended for modification as the
wiring of the humidifier is configured for the factory settings.
Do not modify Parameters E6 and E9 except after consultation with
HygroMatik, since this could lead to malfunctions.
Retrofitting a Signal Relay PCB:
Plug the socket connector JP1 of the relay signal PCB into the socket
base JP3 on the main PCB, so that the two holes on the signal relay
PCB line up with the internal thread bolts (main PCB side).
Secure the signal relay PCB with the two screws provided.
Signal Relay /
Contact
Contacts Parameter for
Selecting
Switching Signal
Setting Factory Setting for
Switching Signal
1. Signal Relay
Normally Closed
Contact
Normally Open
Contact
31, 32, 33
32
33
E6 14 Essence Injector
2. Signal Relay
Normally Closed
Contact
Normally Open
Contact
34, 35, 36
35
36
E7 13 Steam Bath Exhaust Fan
3. Signal Relay
Normally Closed
Contact
Normally Open
Contact
37, 38, 39
38
39
E8 15 Steam Bath Supply Fan
4. Signal Relay
Normally Closed
Contact
Normally Open
Contact
40, 41, 42
41
42
E9 16 Light
Please note