HydroTherm 0M 08, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 24

IMPORTANT INSTRUCTIONS ABOUT BOILER ROOM
!
There must not be any other equipments such as aspirator, air condition central etc. in the boiler rooms.
These kind of equipments can make vacuum effect and defect boilers pull force. This can cause burner
failures.
!
The ceiling of the boiler room can be isolated for sound and heat isolation.The position and place of the
boiler is important for sound isolation of the boiler.
!
Boiler room must have a good lighting and control switches of lighting must be outside of the boiler room.
!
There must not be equipments like water pump,contactor etc.. ø n the boiler room.
!
Gas alarm equipments must be placed to the proper highth as mentioned on standards.
!
No one except the responsible person should get in to the boiler room.
Children must not enter to the boiler room.A second key must be kept in safe place for urgent matters.
!
Fuel tanks must be put in another place which is rounded by walls.Natural air conditioning is needed for
this place. Boiler room must be air conditioned by natural or other ways.
!
Humidity must be prevented in boiler room.
!
Boiler room must have the requested dimensions .
!
There must not be any kind of explosive , burning and flameable materials in the boiler room.
!
There must not be any kind of explosive , burning and flameable gases in the boiler room atmosphere.
!
For the efficiency of the burner and the boiler,boiler room must be kept clean and dry.
!
For feeding water to the boiler,water line must be arranged near the boiler.And for filling out the water of
the boiler in necesarry conditions, there must be a connection to drainage in the system.
!
If there are any electric keys,cables etcc.Which can cause short circuits must be fixed,renewed as soon as
possible.
!
In LPG or liquid fuel use;boiler room, flue, system and plumbing issues must be under parameters of EN
standarts and gas offices orders. is not responsible for any failure or problems that will be occured
because of inadequate or not sufficiently qualified conditions of boiler room,plumbing and other systems.
!
The instructions of local gas delivery must be applied.
!
Before painting keep flameable materials out.
!
Before any welding operation in boiler room, boiler must be stopped and the gas flow must be stopped
by turning of the gas valve.
!
Do not touch the boiler when it is hot.
!
Boiler must not be installed on carpet.
Switch off the boiler immediately if there is danger of burning or explosion (elecricity problem,
gas leakage, liquid gas and liquid fuel leakage etc.).
Positioning the Boiler :
boilers must be positioned and placed in the terms of fine protection laws with caution
When installing and operating the boilers it is necessary to keep a safe 200 mm distance from combus-
tible materials with combustibility degrees B,C
1
,C
2
For easily flammable materials with combustibility degree C
3
,which burn quickly and by themselves also
after the ignition source removal the safe distance is doubled it means 400 mm.
The safe distance is to be doubled also in case that the combustibility degree of building material wasn't
proved.
28
27
! IMPORTANT
28
! CAUTION