HydraMaster Titan H2O Kubota, Руководство пользователя

Страница: 7 / 82

1-1: General Information
HydraMaster’s Titan H
2
O Water Recovery System has been designed to better
accommodate the needs of water extraction, recovery and restoration professionals.
The Titan H
2
O features a WG 972 Kubota engine that powers a Tuthill 4007 Tri-lobe
vacuum blower.
This combination produces over 400 cfm of air flow, more than enough
to extract water with one or two wands
(or other extraction tools).
HydraMaster’s reliable Dura-flow
Automatic Pump Out (APO), offered as
an option, allows you to extract water
without the need to shut down and
dispose of the recovered water.
Other features of the Titan H
2
O include:
Dual oil bath and sight glasses for
•
enhanced blower reliability
Dual tool/wand capable
•
In addition to the obvious performance
aspects of the Titan H
2
O, it delivers
maximum reliability and can be
easily serviced. All service points
are conveniently located so routine
maintenance takes only a few minutes
to perform.
HydraMaster suggests that the operator
of the machine be well acquainted with
the IICRC guidelines for flood extraction and with the various methods of carpet and
surface drying that are currently being used. It is also recommended that the machine
operator be familiar with the local municipality’s requirements for the proper disposal of
waste water.
As with any machine, it is important to use the Titan H
2
O correctly. Operating the machine
is simple as described in Section 3 of this Owner’s Manual. This manual also contains
installation as well as information required for proper maintenance, adjustment and
repair of the Titan H
2
O. Component troubleshooting guides have been included for your
convenience.
1- General Information