HydraMaster Titan H2O Kubota, Руководство пользователя

Страница: 21 / 82

2-1: Installation Information
Although there are many different heavy duty vehicles used for water restoration
equipment,
the preferable vehicle for a Titan H
2
O installation is a cargo van with a heavy-
duty suspension package and a minimum of 3/4 HD ton capacity.
Prior to installation of the Titan H
2
O, HydraMaster recommends installing a spray-on bed
liner in the vehicle. This provides ‘metal to cushion’ mounting rather than ‘metal to metal’
and makes for an attractive van interior.
HydraMaster also recommends installing roof vents in vehicles operated in hot weather
locations. Roof vent positions are shown in figure 2-1.
Consult your local RV distributor about selection and/or
installation of powered roof vents.
for best results, the fan should draw air into the vehicle
which will supply cooler air to the air cleaner intake.
OPERaTIng THE TITan H
2
O In HOT WEaTHER
HydraMaster recommends the following steps when
operating the Titan H
2
O during periods of hot weather (95º f
[35º C] or higher). This will help ensure that your Titan H
2
O
continues to run at 100% capacity during even the hottest
days.
A minimum of 9” (22.9 cm) of clearance is required on both sides of the Titan 1. H
2
O,
when installed. ensure that additional equipment or other materials are not stored
at the sides or on top of the Titan. Unobstructed airflow around the unit is critical for
cooling the engine and other components.
for side-door vans with “barn doors”, open the doors as wide as their construction
2.
will allow. be sure to open the doors beyond their standard “straight-out” position,
if possible, by releasing the stops and putting the doors in their fully extended
position.
Provide cross-ventilation. When possible, keeping the rear doors open while the
3.
Titan is running will substantially reduce the temperature inside the van and will
provide a path for cooling air flow. For rear-mount installations, open up the other
doors in the van.
Consider adding powered roof vents to the vehicle (if not already installed). These
4.
vents can significantly reduce interior temperatures and will result in much cooler
operation.
Location of Figure 2-1.
Roof Vents in Vehicle
2 - Installation Information