Operating and Maintenance Instructions : FCU 2110-5 / FCU 2210-5
Edition 1.10
HYDAC Filtertechnik GmbH
Page 49 of 52
9.3 Inserting a new paper roll
a) Switch off FCU
b) Carry out instructions 9.2 Changing the ink ribbon cartridge a) to c)
c) Lift out old paper roll, remove plastic spindle and place it inside new paper roll.
d) Place new paper roll in the printer so that the paper unrolls from the bottom.
e) Feed paper edge until it stops between the two metal guide plates beneath the feed
roller.
f) Press and hold down green button (LF) while switching on the FCU and wait until
approximately 3 cm of printer paper feeds through.
g) Carry out instructions 9.2 Changing the ink ribbon cartridge d) to f)
Guide plates
for paper
LF = line feed button
Figure 8 : Side view of FCU Printer
10 Recalibration
HYDAC recommends recalibration once a year.
