FluidControl Unit - FCU 1000 Series
HYDAC Filtertechnik GmbH
en
Page 12
BeWa_FCU1000_3371346a_en.doc
2007-12-04
1.8 Electrical
Hazards
WARNING
Electric shock
The power plug must be pulled before performing work
on live parts
Any work involving the power supply may only be done by a properly trained, certified
electrician.
Make sure to check the electrical equipment of the product on a regular basis. Any loose
connections or damaged cables are to be remedied/replaced immediately.
1.9 Maintenance,
Servicing and Troubleshooting
The prescribed adjustment, maintenance/servicing and inspection work is to be conducted in
a timely fashion.
All operating media are to be protected/isolated in case the product is accidentally started up.
Disconnect the FCU from the power supply and protect it from being inadvertently switched
back on when performing any maintenance, servicing, inspection or repair work.
Check any screw fittings which have been removed to see that they have been properly
secured.
After performing maintenance and servicing work, always check the safety features of the
product to see that they function properly.
1.10
Modifications to the FCU
Do not make any modifications (design modifications, extensions) to the FCU without the
prior consent of the manufacturer.
Any design modifications or extensions may not be made without
HYDAC Filtertechnik GmbH’s express prior written approval.
Immediately replace any machine components which are not in perfect condition.
Only use original (OEM) spare parts and consumables. When using non-OEM components it
cannot be ensured that they have been designed and manufactured so as to comply with
loading and safety requirements.
1.11 Cleaning
the
FCU
and disposal of the media and agents used
The cleaning agents and flushing oils used are to be handled and disposed of properly.
The manufacturers' instructions relating to possible use, personal protective equipment and
appropriate disposal must be observed.