2.3 | SAFETY FEATURES
•
Puncture-proof Wheels.
•
Guardrails--1.1 m height with 15 cm kick plates.
•
Non-slip Deck.
•
Entrance Gate.
•
Automatic Parking Brake.
•
Free Descent Protection. A pressure compensated flow control valve is installed in the hydraulic circuit to
prevent the platform from descending in case of a ruptured hydraulic hose. The platform is hydraulically locked
with a check valve and has controlled descent when valve activates.
•
Decals. Danger, Caution, and Warning decals are displayed at various locations on this unit.
•
Key Switch Security. A key switch is required to prevent unauthorized use.
2.4 | SAFETY INDICATORS & INTERLOCKS
Load Sensing
Movement is inhibited when the load exceeds the rated load and elevating is attempted from the stowed position.
When elevating begins, an audible alarm sounds and the overload indicator lights up to indicate that the load
control system is functional. If the load is less than rated load, the light and alarm will stop, and elevating may
continue. If the rated load is exceeded, the alarm and light will continue and the platform will not elevate. Remove
the excess load before continuing operation.
Armguard
When lowering the platform, the platform will stop when the ends of the scissors are 50mm apart for 3 seconds.
Release the enable button. Look around all sides of the scissors to check for persons at risk. Then continue
lowering the platform. If elevating platform less than 50mm, the lift will not descend due to the armguard feature.
Elevate the platform higher before lowering, or use the manual override in case of emergency.
Descent / Motion Alarm
An audible alarm sounds when the machine is lowering.
SECTION 2 | SAFETY
BY CUSTOM EQUIPMENT LLC
9
OPERATIONS & SAFETY
HB-P3.6
SUPO-725
REV C
