2.5 | SAFETY CONTROLS
Descent - Manual Override
For manually lowering the scissors, a manual down valve on the cylinder is provided. To lower the scissors, pull the
cable located near the rear of the machine.
IF PLATFORM SHOULD FAIL TO LOWER, DO NOT ATTEMPT TO CLIMB DOWN THE BEAM ASSEMBLY. SERIOUS
INJURY MAY RESULT. HAVE AN EXPERIENCED OPERATOR USE THE EMERGENCY LOWERING PROCEDURE TO
SAFELY LOWER THE PLATFORM.
Emergency Stop
This lift is equipped with two emergency stop switches, one at the platform control and one at the base control,
that when activated, will render the unit inoperable until reset. To reset, pull the button out.
PUSHING THE EMERGENCY STOP BUTTON WILL APPLY BRAKES IMMEDIATELY. THIS MAY CAUSE UNEXPECTED
PLATFORM MOVEMENT AS THE MACHINE COMES TO A SUDDEN STOP. BRACE YOURSELF AND SECURE
OBJECTS ON THE PLATFORM DURING OPERATION OF THE MACHINE.
SECTION 2 | SAFETY
FIGURE 1: Emergency Lowering Valve
FIGURE 2: Emergency Lowering Instructions
WARNING
WARNING
BY CUSTOM EQUIPMENT LLC
10
OPERATIONS & SAFETY
HB-P3.6
SUPO-725
REV C
