FOREWORD
Original instructions are written in English.
The purpose of this Operations and Safety manual is to provide users with the instructions and operating procedures
essential to properly and safely operate the Custom Equipment Hy-Brid Lift for its intended purpose, and to position
personnel and their necessary tools and materials.
THE OPERATION AND SAFETY MANUAL MUST BE
READ AND UNDERSTOOD PRIOR TO OPERATING THE MACHINE.
•
The user/operator should not accept operating responsibility until the manual has been read and understood as well
as having operated the lift under supervision of an experienced and qualifi ed operator.
•
Because the manufacturer has no direct control over machine application and operation, proper safety practices are
the responsibility of the user and all operating personnel.
ANY MODIFICATION ON THIS MACHINE WITHOUT THE EXPRESS WRITTEN CONSENT OF THE
MANUFACTURER IS PROHIBITED.
Fall protection notice:
The guardrail system around the perimeter of the platform is the fall protection system for push-around elevating
work platforms per the EN: 280 Standard. It is prohibited to use an Aerial Work Platform manufactured by
Custom Equipment, LLC, with any portion—or all—of the guardrails removed. Lanyard anchorage points on this
type of equipment are not required to conform to the applicable standard. However, if anchorage points for
lanyard attachments are required by site authorities or other regulations, the anchorage points on all equipment
manufactured by Custom Equipment, LLC are recommended to be used for work positioning restraints of personnel
only. Lanyard lengths are to be determined by operator/owner to restrict the operator to the confi nes within the
guardrail system.
USE OF FALL ARREST SYSTEMS ATTACHED TO ANCHORAGE POINTS
ON EQUIPMENT MAY CAUSE MACHINE TO TIP, RESULTING IN SERIOUS INJURY OR DEATH.
Lanyard
Attachment
Point
DANGER
WARNING
WARNING
BY CUSTOM EQUIPMENT LLC
3
OPERATIONS & SAFETY
HB-P3.6
SUPO-725
REV C
