5.3 | SHUT DOWN
•
When finished with the machine, place the platform in the stowed position.
•
Carefully exit the platform using the constant three point contact method.
•
NEVER JUMP OFF THE PLATFORM
•
Park the machine on a level surface.
•
Turn master power switch to off position.
•
To prevent unauthorized use, remove the key from the master power switch.
•
The key may be placed in the manual pouch and the cabinet padlocked to secure the machine in the isolated
position.
FIGURE 12: Key Removed
FIGURE 13: Padlock
5.4 | ELEVATING AND LOWERING
To raise or lower the platform, press the Elevate / Lower Enable Button. While holding down the Enable Button,
rotate and hold the Elevate/Lower switch until the platform is in the desired position.
When lowering the platform, the platform will stop when the ends of the scissors are 50mm apart for 3 seconds.
Release the enable. Look around all sides of the scissors to check for persons at risk. Then continue lowering the
platform. (See Safety Features on page 9).
5.5 | DAILY MAINTENANCE
Regular inspection and conscientious maintenance is important for efficient economical operation of this machine.
It will help to assure that equipment will perform satisfactorily with a minimum of service and repair. Make checks
at the stated intervals or more frequently if required by local operation conditions. A Pre-Start Inspection Checklist
is included in this manual. In addition, Pre-Delivery/Frequent and Monthly Checklists are included in a separate
Maintenance Manual. Also refer to the Maintenance Manual for replacement part information.
SECTION 5 | OPERATION
BY CUSTOM EQUIPMENT LLC
24
OPERATIONS & SAFETY
HB-P3.6
SUPO-725
REV C
