HW Group HWg-PWR, Руководство пользователя

Страница: 2 / 32

HWg-PWR: M-Bus IP energy meter (SNMP, WEB) HW group
www.HW-group.com page 2
Package contents
A complete shipment contains the following items:
HWg-PWR unit
Printed datasheet
Safety information
The device complies with regulations and industrial standards in force in the Czech Republic and
the European Union. The device has been tested and is supplied in working order. To keep the
device in this condition, it is necessary to adhere to the following safety and maintenance
instructions.
HWg-PWR connects directly to a 230VAC supply; therefore, it should be installed by
qualified personnel only!
Using the device in a manner other than prescribed by the manufacturer may cause its
safeguards to fail!
The power supply outlet or disconnection point must be freely accessible.
The device must not be used under any of the following conditions:
The device is noticeably damaged
The device does not function properly
Unfastened parts can move inside the device
The device has been exposed to moisture or rain
The device has been serviced by unauthorized personnel
The power adapter or power supply cable are noticeably damaged
If the device is used in a manner other than designed for, the protection provided by
the device may fail.
The electrical system must include a power switch or a circuit breaker and
overcurrent protection.
If you have any problems with installing or operating the device, you may contact
technical support:
HW group s.r.o.
http://www.hw-group.com
Email: support@HWg.cz
U Pily 3
143 00 Praha 4
Tel. +420 222 511 918
When contacting technical support, please note the exact type of your device (at the type
plate) and, if possible, the firmware version.