HW Group HWg-PWR, Руководство пользователя

Страница: 20 / 32

HWg-PWR: M-Bus IP energy meter (SNMP, WEB) HW group
www.HW-group.com page 20
SNMP tab
The SNMP tab is used to configure SNMP communication parameters and target
destinations for SNMP Trap alarms.
General SNMP Settings section
System Name – Name of HWg-PWR within SNMP.
System Location – Location of HWg-PWR within SNMP.
System Contact – Contact information of the HWg-PWR administrator within
SNMP.
SNMP port – Port number for SNMP communication. The default is 161.
SNMP Access section
Community – Name of the SNMP community for accessing HWg-PWR over SNMP.
Two communities can be defined. Each Community can have the following
permissions defined:
o
Read
o
Write
SNMP Trap Destination section
Destination – Index of the target destination for SNMP traps. Only A can be set,
other indexes are reserved for future use.
Community – Name of the Community where the SNMP trap is sent.
IP Address – Target IP address for SNMP Traps.
Port – Target port for SNMP Traps. Default is 162.
Enable – Activation of the target destination. Useful for disabling all SNMP traps
without regard to the settings for individual values.