HW Group HWg-PWR, Руководство пользователя, Страница: 12 / 32

HWg-PWR: M-Bus IP energy meter (SNMP, WEB) HW group
www.HW-group.com page 12
Automatic discovery of meters:
1. At the Device Base Parameters page, fill in the M-Bus Scan section:
- Address – Range of M-Bus addresses where the meters can be discovered.
The default is 0-252; however, a smaller range can speed up the discovery
process significantly.
- Serial Baudrate – Communication speed. The default is 2400 but this can
differ for various meters – see the meter documentation.
- Serial Parity – Communication parity. The default is Even but this can
differ for various meters – see the meter documentation.
2. Click Scan .
3. The M-Bus Device Scan Status section displays the discovery progress ( Actual scan
state ) and discovered meters ( Found Device ).
4. After the scan is complete, Actual scan state changes to Stopped .