Huvema HU 320 UM TOPLINE, Руководство пользователя

Страница: 4 / 64

4
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
2. a
ddiTional safeTy rUles
Always keep in mind that:
• the machine must be switched off and disconnected from the power supply during maintenance and repairs,
• clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
Always wear safety glasses!
1. Some dust created by power sanding, sawing, grinding, drilling and other construction activities
contain chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead based paint.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety
equipment, such as face or dust masks that are specifically designed to filter out microscopic
particles.
2. Permanently connected tools:
This tool should be connected to a grounded metal permanent wiring system; or to a system
having an equipment-grounding conductor.
3. For your own safety read instruction manual before operating drill press
• Wear eye protection.
• Do not wears gloves, necktie, or loose clothing.
• Clamp work-piece or brace against column to prevent rotation.
• Use recommended speed for drill press accessory and workpiece material.
Intended use
The machine is suitable for direct and using conventional milling and drilling operations of metals and
plastics. The processing of other materials is inadmissible or must be carried out in special cases only
after
CONFIRMED
with the machine manufacturer.
The intended use also includes compliance with the manufacturer’s specified operating - and the
maintenance and repair instructions. The machine must only persons who are familiar with the
operation, maintenance and repair, and are informed about the dangers, operated and supervised.
All accident prevention and safety instructions for working with the machine tools and CNC machine
tools must always be respected. With improper use of the machine by the manufacturer liability will be
accepted, and the responsibility solely to the user transmitted.
3. G
eneral
3.1 T
eCHniCal
s
peCifiCaTions
Carriage Traversing (manual) Coolant System
Slide Travel Longitudinal (X) 400 mm Power Pump motor 90 W
Slide Travel Cross (Y) 200 mm Container capacity 42 L
Slide Travel Vertical (Z) 365 mm Max. Coolant flow 25 L / min
Clamping Surfaces Scale Ring Division of hand wheels
Table Size 320 x 750 mm X-, Y- and Z-axis 0,02 mm
T-slots 14 x 63 / 5 no. Quill.. 0.02 mm
Work-piece weight Max.
Electrical connection
Vertical Table Size 220 x 830 mm Power Supply 400V / 3 / PE