Huvema HU 320 UM TOPLINE, Руководство пользователя

Страница: 22 / 64

22
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
Returning to upright position of Vertical milling head
Follow up with the above instruction (Removing the Vertical milling head) conversely.
• To return the vertical milling head for match up with “0” position from the angle scale as well (5).
• To tightening these 4 hex nuts front side of the milling head.
• Read dial indicator. The indicator should read zero. If not, loosen these 4 hex nuts and reposition the mill head.
4.5.3 f
eed drives for
X- z
direCTion
(l
onGiTUdinal
- v
erTiCal
)
and
y
direCTion
(T
ransverse
)
Technical specifications
• Feed force 1600N
• Infinitely variable feed rate of 50-450 mm / min
• Rapid traverse rate 800 mm/min
• Slip clutch to stop milling
4.5.4 C
laMpinG Tools
Provide gear to the smallest spindle speed. Keep tools in the spindle and secure it by tightening rod clockwise
(right-hand thread).
Vertical milling spindle
The 22mm open wrench (for tightening the cutter in the vertical milling spindle)
is for rigidly reasons by an one-piece steel draw bar worked smoothly.
Clamping devices for vertical milling ISO-40 spindle taper with thread M16.
CAUTION: Clamping nose and spindle tapersurface must be dust and
grease free!
CAUTION: Clean tool disc and stem taper before installation.
2-5-03. Feed drives for X- Z direction
(Longitudinal - Vertical) and
Y direction (Transverse)
The feed drives consist of universal helical gears
and inverter motor.
Technical specifications
Feed force 1600N
Infinitely variable feed rate of 50-450 mm / min
Rapid traverse rate 800 mm/min
Slip clutch to stop milling
2-5-04. Clamping tools
Provide gear to the smallest spindle speed.
Keep tools in the spindle and secure it by tightening rod clockwise (right-hand
thread).
Vertical milling spindle
The 22mm open wrench (for tightening the cutter in the vertical milling spindle)
is for rigidly reasons by an one-piece steel draw bar worked smoothly.
Clamping devices for vertical milling ISO-40 spindle taper with thread M16
Clamping nose and spindle taper
surface must be dust and grease
free!!
Clean tool disc and
stem taper before installation.
30
2-5-03. Feed drives for X- Z direction
(Longitudinal - Vertical) and
Y direction (Transverse)
The feed drives consist of universal helical gears
and inverter motor.
Technical specifications
Feed force 1600N
Infinitely variable feed rate of 50-450 mm / min
Rapid traverse rate 800 mm/min
Slip clutch to stop milling
2-5-04. Clamping tools
Provide gear to the smallest spindle speed.
Keep tools in the spindle and secure it by tightening rod clockwise (right-hand
thread).
Vertical milling spindle
The 22mm open wrench (for tightening the cutter in the vertical milling spindle)
is for rigidly reasons by an one-piece steel draw bar worked smoothly.
Clamping devices for vertical milling ISO-40 spindle taper with thread M16
Clamping nose and spindle taper
surface must be dust and grease
free!!
Clean tool disc and
stem taper before installation.
30