Huvema HU 320 UM TOPLINE, Руководство пользователя

Страница: 15 / 64

15
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
2-3-05. Table Guard Assembly
The splash guard consists of three
plug-sheets and three clearly PC plate.
The quick-release fasteners allow quick
disassembly and assembly, easy to
cleaning.
1) Splash Plate (3 pcs)
2) PC material glass (4 pcs)
3) Clamping Housing
4) Chip Tray
2-3-06. Safety Hand Wheels
The hand wheels to slide adjustment
The safety round hand wheels allows easy
and precise adjustment of the slide.
The scale rings on the hand wheels are
adjustable (scale division 0.02 mm)
With a full hand wheel rotation, the slide
can be moved 2.5 mm for an one cycle.
The hand wheels for the longitudinal (X) and
cross slide (Y) are designed as a safety
hand wheels.
With automatic slide feed the Safety hand
wheels not rotate with (safety regulations)
For manual feed (manual adjustment)
Turn the safety hand wheels slightly and
push it out until it engages.
Scale and position signs
The position signs are can be adjustable,
thereby reading the adjustment is simplified
to the scales.
4
3
2
1
19
Slide Clamp
Longitudinal - cross - and vertical slide
can be clamped with actionable clamping
levers.
Reacting the clamping lever
Depending on working in what angular
position and to what extent, the clamping
lever can be put into user-friendly position.
The respective clamping lever is pulled up
as far as he can react. Reacting possible
in 30 degree increments.
Stops for longitudinal slide
The longitudinal slide (item-A & A-1) can be
set for the manual and automatic feed.
For the milling stop with an automatic
shift for a slip clutch is fitted.
We have been set-up the UM milling for all slide clamps as properly before packing
in the manufacturer, except carriages with working feed.
There are included:
Longitudinal slide, Cross slide, Vertical slide and Spindle clamp.
A A-1
20
A
A-1
4.3.5 T
able
G
Uard
a
sseMbly
The splash guard consists of three plug-sheets and three clearly PC
plate. The quick-release fasteners allow quick
disassembly and assembly, easy to cleaning.
1. Splash Plate (3 pcs)
2. PC material glass (4 pcs)
3. Clamping Housing
4. Chip Tray
4.3.6 s
afeTy
H
and
W
Heels
The hand wheels to slide adjustment. The safety round hand wheels
allows easy and precise adjustment of the slide. The scale rings on
the hand wheels are adjustable (scale division 0.02 mm)
With a full hand wheel rotation, the slide
can be moved 2.5 mm for an one cycle.
The hand wheels for the longitudinal (X) and cross slide (Y) are
designed as a safety hand wheels. With automatic slide feed the
Safety hand wheels not rotate with (safety regulations)
For manual feed (manual adjustment) Turn the safety hand wheels
slightly and push it out until it engages.
Scale and position signs
The position signs are can be adjustable,
thereby reading the adjustment is simplified
to the scales.
Slide Clamp
Longitudinal - cross - and vertical slide can be clamped with
actionable clamping levers.
Reacting the clamping lever
Depending on working in what angular position and to what
extent, the clamping lever can be put into user-friendly position. The
respective clamping lever is pulled up as far as he can react. Reacting
possible in 30 degree increments.
Stops for longitudinal slide
The longitudinal slide (item-A & A-1) can be set for the manual and automatic feed.
For the milling stop with an automaticshift for a slip clutch is fitted.
CAUTION
We have been set-up the UM milling for all
slide clamps as properly before packing in the
manufacturer, except carriages with working feed.
There are included: Longitudinal slide, Cross slide,
Vertical slide and Spindle clamp.