Huvema HU 320 UM TOPLINE, Руководство пользователя

Страница: 18 / 64

18
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
4.4 C
UTTinG CapaCiTy of THe MaCHine
The diagram shows possible cutting depths and feed Great for each cutter diameter.
Example: D = 50 mm, t = 8 mm ; Results feed = 50 mm/min
Example: D = 50 mm, V = 70 mm ; Results feed = 6 mm
The values listed are for steel SC45. For softer or stronger materials, the value are in accordance to others.
In the case of milling cutter diameter less than 20 mm, maximum feed rate and cutting depth are usually announced
by the tool manufacturer. The small milling diameter, this data is limited by the cutter design and not by the engine
power.
4.4.1 d
iaGraM for speed deTerMinaTion
2-4-01. Diagram for Speed determination
2-4-02. Diagram for feed rate calculation
24
2-4. Cutting Capacity of the machine
The diagram shows possible cutting depths and feed Great for each cutter
diameter.
Example: D = 50 mm, t = 8 mm
Results feed = 50 mm/min
Example: D = 50 mm, V = 70 mm ; Results feed = 6 mm
The values listed are for steel SC45. For softer or stronger materials, the value
are in accordance to others.
In the case of milling cutter diameter less than 20 mm, maximum feed rate and
cutting depth are usually announced by the tool manufacturer. The small milling
diameter, this data is limited by the cutter design and not by the engine power.
23