FRONT GLASS POSITIONING
Vertical Adjustment
The position of the front edge of the glass is
vertically adjustable to ensure proper fit as
shown below.
The front glass adjustment brackets are located
and accessed at the rear of the case. To raise or
lower the lower the front edge of the glass:
1. Loosen the two side bolts ‘C’.
2. To raise the front edge, first loosen bolt ‘B’
then tighten bolt ‘A’ until the edge is level.
To lower the front edge, first loosen bolt ‘A’
then tighten bolt ‘B’ until the edge is level.
DO NOT tighten one before loosening the
other!
3. Tighten both side bolts ‘C’.
Horizontal Adjustment
Loosen Allen bolts at each end of the glass.
Reposition glass as necessary, and tighten bolts.
P/N 0453549
1-5
Elite Service Merchandisers
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
SUPPORT FRONT GLASS AT ALL TIMES
DURING ADJUSTMENT!
Adjust all hinge assemblies
on each case at the same time
to prevent glass binding and breakage.
WARNING
!
Minimum Space
3
/
4
in. (20mm)
B
C
A
C
