SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during
unloading. This equipment has been carefully
inspected at our factory. Any claim for loss or
damage must be made to the carrier. The carrier
will provide any necessary inspection reports
and/or claim forms.
Apparent Loss Or Damage
If there is an obvious loss or damage, it must be
noted on the freight bill or express receipt and
signed by the carrier’s agent; otherwise, carrier
may refuse claim.
Concealed Loss Or Damage
When loss or damage is not apparent until after
equipment is uncrated, retain all packing
materials and submit a written request to the
carrier for inspection, within 15 days.
EXTERIOR LOADING
Do NOT walk on top of merchandisers
or
damage to the merchandisers and serious
personal injury could occur. Merchandisers
ARE
NOT STRUCTURALLY DESIGNED TO SUPPORT
EXCESSIVE EXTERNAL LOADING
such as the weight
of a person. Do not place heavy objects on the
case.
MERCHANDISERS SHIPPED
WITH END INSTALLED
I
MPORTANT
:
Be careful not to damage the factory
installed end while moving the case. Make sure
that tools are positioned past the end and beneath
the merchandiser’s support bar.
SHIPPING BRACES
Move the fixture as close as possible to its
permanent location and then remove all
packaging and shipping braces. Check for
damage before discarding packaging. Remove all
separately packed accessories such as kits, and
shelves.
Remove all nut retainers used with shipping
braces. NSF certification requires the use of
ANSI Standard nuts and bolts with not more than
two (2) threads showing after installation.
SHIPPING RIDER
Each case is shipped on a rider to protect
factory-installed legs, and to make positioning
the case easier. Remove the rider after the case
has been positioned.
Note: Once the rider is removed, the case must
be lifted –NOT PUSHED– to reposition.
To remove the rider, remove screws attaching
each leg to rider. Remove screws holding rider
cross-members, then slide cross-members out
from between sides. Once cross-members are
out, slide the sides out.
1-2
I
NSTALLATION
P/N 0453549
Do NOT remove shipping braces until the
merchandisers are
positioned for installation.
WARNING
!
Do not walk or put heavy objects on case.
CAUTION
!
