6-6
S
ERVICE
P/N 0453549
REPLACING FRONT GLASS
REQUIRES AT LEAST TWO PEOPLE!
The following procedure is for field replacement
of hinged front curved or straight glass.
1. Open glass to its full extension.
2. With glass fully supported, loosen Allen
bolts at each end of the glass.
Once Allen bolts are loose, the glass and
glass clamp have NO support or retainers.
Support the front glass at all times until the
glass clamp and Allen bolts are secured,or
glass is removed.
3. Remove Glass.
4. Apply gasket to new replacement glass.
5. Position replacement glass in clamps and
tighten Allen bolts at each end.
IMPORTANT
When reinstalling glass, be certain that:
• Gasket is on glass evenly.
• Glass is fully seated in clamps.
• When set screws are tightened,glass is
firmly held in place by the glass clamps.
6. Adjust glass horizontally and vertically as
described on Page 1-5,
Front Glass
Positioning
.
Glass
Gasket
Clamp
Support front glass at all times until
clamps and screws are secure
or glass is removed!
Adjust all hinge assemblies
on each case at the same time
to prevent glass binding and breakage.
WARNING
!