Husqvarna TC 50 2023, Руководство пользователя

Страница: 36 / 196

10 TUNING THE CHASSIS
34
V00260-10
–
Position the shock absorber and rear wheel.
–
Mount and tighten screw
2
and nut
1
.
Guideline
Screw, bot-
tom shock
absorber
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Remove the motorcycle from the lift stand. ( p. 42)
10.7 Measuring the dimension of the rear wheel unloaded
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 42)
400988-10
Main work
–
Measure the vertical distance between the rear axle and a
fixed point, such as a marking on the side cover.
–
Note the value as dimension
A
.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 42)
10.8 Checking the static sag of the shock absorber
400989-10
–
Measure dimension
A
of rear wheel unloaded. ( p. 34)
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance between rear axle and fixed point
again.
–
Note the value as dimension
B
.
Info
The static sag is the difference between measure-
ments
A
and
B
.
–
Check the static sag.
Static sag (TC 50) 12 mm (0.47 in)
Static sag (TC 50 MINI) 10 mm (0.39 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
( p. 35)