Husqvarna TC 50 2023 Скачать руководство пользователя

Страница: 19 / 196

CONTROLS 6

6.7

Closing oil tank cap (TC 50 MINI)

A00092-11

–

Put the oil tank cap on and turn it clockwise.

Info

Run the oil tank breather hose

without kinks.

6.8

Fuel tap

K00649-10

Fuel tap

is on the left of the fuel tank.

Possible states

• Fuel tap is closed

–

The knurled screw is turned all the way

clockwise. Fuel cannot flow out of the fuel tank.

• Fuel tap is open

–

The knurled screw is turned all the way

counterclockwise. Fuel can flow out of the fuel tank.

6.9

Choke (TC 50)

S03217-10

Choke

is fitted on the left side of the carburetor.

Activating the choke function frees a drill hole in the carburetor

through which the engine can draw extra fuel. This results in a

richer fuel-air mixture, which is needed for a cold start.

Info

If the engine is warm, the choke function must be deacti-

vated.

Possible states

• Choke function activated

–

The choke lever is pulled out to

the stop.

• Choke function deactivated

–

The choke lever is pushed in

to the stop.

6.10

Choke (TC 50 MINI)

A00093-10

The choke lever

is fitted on the right of the carburetor.

Activating the choke function frees a drill hole in the carburetor

through which the engine can draw extra fuel. This results in a

richer fuel-air mixture, which is needed for a cold start.

Info

If the engine is warm, the choke function must be deacti-

vated.

Содержание TC 50 2023





































































































































































































Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды

Husqvarna TC 50 2023, Руководство пользователя

Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды