Husqvarna TC 50 2023 страница 55 Скачать руководство пользователя

Страница: 55 / 196

SERVICE WORK ON THE CHASSIS 11

11.14

Removing the fuel tank

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

–

Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.

–

Switch off the engine for refueling.

–

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

–

If any fuel is spilled, wipe it off immediately.

–

Observe the specifications for refueling.

Warning

Danger of poisoning

Fuel is harmful to health.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

Rinse the affected area immediately with plenty of water in the event of contact with the skin.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing if fuel spills on them.

–

Keep fuels correctly in a suitable canister, and out of the reach of children.

Preparatory work

–

Remove the seat. (

p. 62)

–

Remove the left side cover. (

p. 58)

–

Remove the right side cover. (

p. 56)

–

Turn the knurled screw on the fuel tap all the way clockwise.

K00663-10

Main work

–

Remove screw

K00664-10

–

Raise the fuel tank.

–

Pull off fuel hose

Info

Remaining fuel may flow out of the fuel hose.

–

Pull fuel tank breather out of the steering stem.

–

Take off the fuel tank.

Содержание TC 50 2023





































































































































































































Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды

Husqvarna TC 50 2023, Руководство пользователя

Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды