Husqvarna TC 50 2023 страница 105 Скачать руководство пользователя

Страница: 105 / 196

COOLING SYSTEM 14

103

–

Check the coolant level. (

p. 101)

14.6

Changing the coolant

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not open the radiator, the radiator hoses or other cooling system components if the engine or

the cooling system are at operating temperature.

–

Allow the cooling system and the engine to cool down before you open the radiator, the radiator

hoses or other components of the cooling system.

–

In the event of scalding, rinse the area affected immediately with lukewarm water.

Warning

Danger of poisoning

Coolant is harmful to health.

–

Keep coolant out of the reach of children.

–

Do not allow coolant to come into contact with the skin, the eyes and clothing.

–

Consult a doctor immediately if coolant is swallowed.

–

Rinse the affected area immediately with plenty of water in the event of contact with the skin.

–

Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.

–

Change clothing if coolant spills onto your clothing.

Condition

The engine is cold.

–

Position the motorcycle upright.

–

Place an appropriate container under the water pump cover.

K01159-10

–

Remove screw

. Take off the radiator cap.

–

Completely drain the coolant.

K01162-10

–

Mount and tighten screw

with a new seal ring.

Guideline

Drain plug, water

pump cover

6 Nm (4.4 lbf ft)

–

Add coolant to level

Guideline

Distance

above the radi-

ator fins

10 mm (0.39 in)

Coolant

0.7 l (0.7 qt.)

Coolant (

p. 137)

Содержание TC 50 2023





































































































































































































Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды

Husqvarna TC 50 2023, Руководство пользователя

Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды