Husqvarna SMS4, Руководство по ремонту

Страница: 28 / 136

F.12 Part. N. 8000 H4707 (07-2010)
TECHNICAL DATA
Generator cover bolt M6 7 10 Nm (1.0 m·kg, 7.2 ft-lb)
Clutch casing bolt M6 4 10 Nm (1.0 m·kg, 7.2 ft-lb)
Clutch casing bolt M6 6 10 Nm (1.0 m·kg, 7.2 ft-lb)
Sprocket cover bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft-lb)
Unidirectional starter bolt M6 3 14 Nm (1.4 m·kg, 10 ft-lb)
Primary drive gear
nut
M12 1 60 Nm (6.0 m·kg, 43 ft-lb)
Clutch spring bolt M6 4 12 Nm (1.2 m·kg, 8.7 ft-lb)
Short clutch pushrod check nut M6 1 8 Nm (0.8 m·kg, 5.8 ft-lb)
Clutch hub nut M14 1 70 Nm (7.0 m·kg, 50 ft-lb)
Sprocket stop bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft-lb)
Crankcase bearing stop bolt M6 2 7 Nm (0.7 m·kg, 5.1 ft-lb)
Gear selector drum section screw M6 1 12 Nm (1.2 m·kg, 8.7 ft-lb)
Stop lever bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft-lb)
Stator coil bolt M6 3 10 Nm (1.0 m·kg, 7.2 ft-lb)
Crankshaft position sensor bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft-lb)
Generator rotor nut M12 1 70 Nm (7.0 m·kg, 50 ft-lb)
Neutral switch M10 1 20 Nm (2.0 m·kg, 14 ft-lb)
Starter motor bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft-lb)
Starter motor bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft-lb)
Coolant temperature sensor M12 1 18 Nm (1.8 m·kg, 13 ft-lb)
Element Thread Quantity Tightening torque Remarks