Husqvarna SG13, Руководство оператора

Страница: 19 / 48

CONTROLS
19
Speed Control Lever
The speed control lever on the engine is normally not
used. It is connected to the throttle on the handle. If
the cable should bind or break, you can reduce the
throttle with the lever on the engine as an emergency
measure to slow the engine speed to an idle and stop
the cutting wheel.
8011-034a
Starter
The magnapull-type starter has spring return. To
replace the return spring or starter cord, contact an
authorized service workshop.
Starter Handle
Misuse of the starter handle can damage the starter.
Do not twist the starter cord around your hand.
Pull out the handle slowly until the gears mesh. Do not
pull out the starter cord completely and do not let go
of the starter handle when extended.
8011-127
IMPORTANT INFORMATION
Do not let the recoil cord snap back by itself.
This may damage the cord or the recoil
starter assembly.
WARNING!
Do not run the engine indoors, in
enclosed or poorly ventilated spaces.
Engine exhaust fumes contain
poisonous carbon monoxide.