25
104 72 79-26
17.Pivot height
Check
1. When the presser foot “R” is in its “Pivot” position the distance between the lower side of
presser foot “R” and the needle plate should be 1.50 mm +/-0.20 mm.
Adjustment
1. Mount the presser foot”R” on the machine.
2. Lower the feed dog.
3. Touch then the function button “presserfot down” so the presser bar takes its “pivot” position.
4. Go to the service program and Menu 1 and press key 0
5. To adjust the distance use Stitch width keys + and -
The adjustments can be done between -10 and +10.
The adjustment is automatically set when a key is touched, and is saved when turning off on the machine.
6. Check the distance between the lower side of presser foot “R” and the needle plate so it is 1.50 mm +/-
0.20 mm.
Settings
1,50 mm +/-0,20 mm
