English
– 35
MAINTENANCE AND SERVICE
Daily Maintenance
Check radiator coolant level.
•
Remove the lid and look down, the level should reach the
start of the tube inside. Fill with coolant if needed.
Check the engine’s oil level
Check engine oil level without blade and the saw horizontal
for a flat saw level.
•
On the left side of the saw, check the engine oil level.
•
Make sure the level is between the limits.
Check blade guard for damage
•
Check the blade guard for cracks.
•
Never use a broken or damaged blade guard.
Check all hoses and clamps for damage or
looseness.
The image only shows some of the hoses and clamps.
•
Look for leakage on fuel, hydraulics and cooling system.
Tighten or replace as necessary.
Check air cleaner restriction indicator.
•
Check and clean the outer air filter if the air cleaner
indicator is red, remove the rear cover by opening the 3 air
filter housing clamps and pulling the housing off.
•
Clean the filter by blowing the element from inside out.
Use the lowest possible air pressure to remove the dust
without damaging the element.
Use 42-47 PSI (0,29-0,49 MPa;3,0-5,0 kgf/cm
2
)
compressed air to remove particulates.
•
Replace any damaged filters or gaskets and check air
hose and clamps for damages or looseness. Tighten or
replace as required.
!
WARNING! Switch off the engine before
carrying out any checks or maintenance.
!
WARNING! Let the engine cool down before
opening the radiator coolant lid.
NOTICE! No need to clean the inner filter on a daily basis.
The 3 air filter housing clamps can not be closed unless the
outer air filter is properly installed.
Содержание FS7000 DL
Страница 159: ......
