Husqvarna DXR300, Руководство оператора

Страница: 32 / 60

32 –
English
SETTINGS
ADJUSTABLE
Select this when you want to work with a tool that is not a standard tool.
The value for oil pressure and oil flow can be adjusted from port A to B. Select which setting you would like to change with the
selection keys. Use the arrow keys to change the value.
The oil direction can either be one-way – with or without grease (e.g. when working with a breaker) or two-way – with or without
grease (e.g. when working with a crusher). Press the selection key to switch to another mode.
Service
WORKING LIGHT
Activates/shuts off the work lighting. Press the selection key to switch to another mode.
TRACK TENSION
Hold the selection key down to activate the track tension.
OIL REFIL
The oil level is read through the sight gauge on the hydraulic tank. Refilling is needed if the level is more than 1 cm below the max
mark.
Hold the selection key down to refill oil.
Use the sight gauge to check the oil level when refilling.
NOTICE! Can not be shut off during operation.
Adjustable tool
Oil press. A-B: 200 bar
(30...250 bar)
Adjustable tool
Oil flow A-B: 50 l/min
(5...65 l/min)
Adjustable tool
Oil flow B-A: 50 l/min
(5...65 l/min)
Back
Adjustable tool
Oil press. B-A: 150 bar
(30...250 bar)
xx bar xx °C
Adjustable tool
Oil DIRECTION A<=>B
No grease
WORK
ADJUSTABLE
WORKING LIGHT
ON/OFF
SERVICE
TRACK TENSION
ON/OFF
Back
Activate
TRACK TENSION
SERVICE
Hold down
to activate
OIL REFIL
ON/OFF
SERVICE
Back
Activate
OIL REFIL
Hold down
to activate